I'm having a speed issue and posted it on the IWD2EE discord but haven't gotten any answers. I hope this isn't a bad place to post this.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
I'm having a speed issue and posted it on the IWD2EE discord but haven't gotten any answers. I hope this isn't a bad place to post this.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
I'm having a speed issue and posted it on the IWD2EE discord but haven't gotten any answers. I hope this isn't a bad place to post this.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
I'm having a speed issue and posted it on the IWD2EE discord but haven't gotten any answers. I hope this isn't a bad place to post this.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
It is not a bad place to post your question, though posting it 3x in a row is ... odd. I also have some mild issues posting on this forum (refresh the page after posting instead of reposting).
The best place to get answers though in on the Discord for this community (IWD2EE modders and supporters).
Does anyone know what causes this bug? There should be a number instead of %d. I only have IWD2EE Core and Creature Revisions components installed. No other mods.
Does anyone know what causes this bug? There should be a number instead of %d. I only have IWD2EE Core and Creature Revisions components installed. No other mods.
There's another player who has had this same issue, although there wasn't a resolution posted that I can find. It likely has to do with not having one of the components installed - probably Class Revisions.
Hello i know GOG version + EE works on Windows 7 x32 (Can confirm).
What about linux (ubuntu or mint) any chance ?
Will in future this EE will be build in in GOG version ?
There's another player who has had this same issue, although there wasn't a resolution posted that I can find. It likely has to do with not having one of the components installed - probably Class Revisions.
I tried installing Class Revisions in addition to the other two components and now I have a different bug: there is no %d but also no information about the sneak attack damage at all. It just prints "Sneak Attack".
Non mi installa la mod. Ho scaricato lo zip, messo nella cartella del gioco, lancio l'installazione, ma verso la fine mi da un messaggio di errore e non la completa. Uso win11 aggiornato.
EDIT. sbagliavo io... lanciavo l'eseguibile da dentro la cartella zip, ho invece scompattato il tutto nella directory del gioco e l'installazione è partita regolarmente!
Hello everyone, i start play the EE and with my wizard i cant learn more than 24 spells in spellbook
For example i have 24 spells learned at 2nd level and i cant learn the last spell "translocation trick" , even when i level up the doesnt allow me to click it and add it to my spellbook , i tried to put it with mod also via dalekeeper and it doesnt show in spellbook.
Ok i found a bug the "translocation trick" whenever i add it to a spellbook of a wizard, even one that i start from scratch, or if i delete another spell and add the spell "translocation trick" via dalekeeper to my wizard it immediatrly is removed from spellbook of every wizard i have made every time i save or load a game, after that if i try to put it in spellbook via level up it says you cant have more that 24 spells in your spellbook
24 spells per level is capped because it causes problems in the game if you go over that, so the devs specifically limited it.
The reason you can't add "translocation trick" via DaleKeeper is because it's a new spell added by IWD2EE and DaleKeeper can't see the new spells, feats, etc. that have been added. You can seriously bug up your game using DaleKeeper to edit those things for IWD2EE. You should use the version of Near Infinity on the OlvynChuru's github.
I have the problem only with "translocation trick"
even with CLuaConsole and addspell the only spell that is removed is "translocation trick",
i even add all spells with dalekeeper, i had 28 spells in 1st level 29 in 2nd level e,t,c no other spell is removed from spellbook exept from "translocation trick" whenever i do a save and load,
Hello, I've completed Id2EE. I joined Vrek Vileclaw's party. I wanted to start the campaign on the Heart of Fury difficulty. But I can't export him to the character file like the rest of the party. Is there any way to do this?
Hello, I've completed Id2EE. I joined Vrek Vileclaw's party. I wanted to start the campaign on the Heart of Fury difficulty. But I can't export him to the character file like the rest of the party. Is there any way to do this?
Hi! Thank you for a new mod!
I'm wondering, is there a way to change the npcs portraits? And how?
Thanks!
Ok, I've figured it out
You can change the npc portraits by replacing them in the overfolder that's located in IWD2 main installation location. You have to name them exactly and they have to be in BMP format, and the right size
Hi. Has anyone been able to get IWD2EE working on the steam deck? I did a full install on my windows pc, then transferred the entire folder via warpinator to the deck. When I add to steam with proton 8 ge, the game launches with a black screen, freezing every time. Would appreciate any help!
Hey! Im not being able to run this mod past the resolution select screen. I put the mod in the game folder, followed the steps to set it up, i also used the ddraw tool, ran the game from the correct "IWD2EE.EXE", tried selecting all the resolution options available, running it in a window, added "IWD2EE.EXE" as an exception to my antivirus and im using the newest version 3.3.4.1. None worked, after selecting a resolution the resolution window dissapears, my pc tries to run the game and it crashes without showing any error or warning screen. Please i really want to play with this mod and would appreciate any help.
Hi! Like the last poster, I would recommend asking this question on the mod's discord server. It is much more active than this thread. This kind of problem has come up before and Bubb is usually able to help.
Hi. Has anyone been able to get IWD2EE working on the steam deck? I did a full install on my windows pc, then transferred the entire folder via warpinator to the deck. When I add to steam with proton 8 ge, the game launches with a black screen, freezing every time. Would appreciate any help!
I was able to get it working. This is what I did to get it working in the end. FYI many of these steps are likely useless, it's just what I attempted.
Icewind Dale 2 bought from GOG.
Installed in Steam Deck using Heroic launcher.
Copied my working Icewind Dale 2 Enhanced Edition install over.
In Heroic you can select an "Alternative launcher" so I pointed this to the new IWD2EE.exe
This would launch but be incredibly slow.
The launcher would also say cnc was not installed.
In Heroic there's an option to run EXE with Wineprefix option when looking at a games properties. Ran the cnc-config.exe or whatever it was called. I also disabled cmst in Heroic and using Proton GE but not sure if any of thats required.
This would let me run the game great...except some items were bugged 😆 lots of blank items on the floor with no icons.
So in the end I just used the same run EXE with Wineprefix option in Heroic on the Icewind Dale 2 EE installer and it worked. I have no idea if copying the files over originally helped at all or if I would have saved a ton of time just installing it directly.
I also had to update where the save game path is for cloud saves to work.
I don't think I did anything else. Just left Targos and the game runs great.
As other people have said though the discord would help. If you get a definitive answer maybe post it here? Lots of people don't use discord or find it hard to find info like this amongst all the noise. If your getting a black screen though and no launcher window for the resolution are you defintely targetting the IWD2EE.exe and not the original?
Comments
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
I used to play on 40 frames back when IWD2 initially released, so after I started playing your EE edition, I went in and started making adjustments. Whenever I adjust the frame limit, there's some weird issues going on. While tinkering with it, I've noticed there's zero difference between 30 and 35 in game. However, when I bump it up to 40, it jumps all the way up to 60 frames in game. Is there a setting I'm missing somewhere?
30 frames is a bit slow for me, while 60 is just too much. If there's any way to get to the 40 or 45 mark, I'd greatly appreciate any feedback - please and thank you.
It is not a bad place to post your question, though posting it 3x in a row is ... odd. I also have some mild issues posting on this forum (refresh the page after posting instead of reposting).
The best place to get answers though in on the Discord for this community (IWD2EE modders and supporters).
There's another player who has had this same issue, although there wasn't a resolution posted that I can find. It likely has to do with not having one of the components installed - probably Class Revisions.
What about linux (ubuntu or mint) any chance ?
Will in future this EE will be build in in GOG version ?
I tried installing Class Revisions in addition to the other two components and now I have a different bug: there is no %d but also no information about the sneak attack damage at all. It just prints "Sneak Attack".
EDIT. sbagliavo io... lanciavo l'eseguibile da dentro la cartella zip, ho invece scompattato il tutto nella directory del gioco e l'installazione è partita regolarmente!
Does it fix the audio issues that Infinity Sounds takes care of for the BG games?
For example i have 24 spells learned at 2nd level and i cant learn the last spell "translocation trick" , even when i level up the doesnt allow me to click it and add it to my spellbook , i tried to put it with mod also via dalekeeper and it doesnt show in spellbook.
Ok i found a bug the "translocation trick" whenever i add it to a spellbook of a wizard, even one that i start from scratch, or if i delete another spell and add the spell "translocation trick" via dalekeeper to my wizard it immediatrly is removed from spellbook of every wizard i have made every time i save or load a game, after that if i try to put it in spellbook via level up it says you cant have more that 24 spells in your spellbook
The reason you can't add "translocation trick" via DaleKeeper is because it's a new spell added by IWD2EE and DaleKeeper can't see the new spells, feats, etc. that have been added. You can seriously bug up your game using DaleKeeper to edit those things for IWD2EE. You should use the version of Near Infinity on the OlvynChuru's github.
https://github.com/OlvynChuru/NearInfinity
even with CLuaConsole and addspell the only spell that is removed is "translocation trick",
i even add all spells with dalekeeper, i had 28 spells in 1st level 29 in 2nd level e,t,c no other spell is removed from spellbook exept from "translocation trick" whenever i do a save and load,
I'm wondering, is there a way to change the npcs portraits? And how?
Thanks!
Ok, I've figured it out
You can change the npc portraits by replacing them in the overfolder that's located in IWD2 main installation location. You have to name them exactly and they have to be in BMP format, and the right size
https://discord.gg/t7pWFx2B5Q
I was able to get it working. This is what I did to get it working in the end. FYI many of these steps are likely useless, it's just what I attempted.
Icewind Dale 2 bought from GOG.
Installed in Steam Deck using Heroic launcher.
Copied my working Icewind Dale 2 Enhanced Edition install over.
In Heroic you can select an "Alternative launcher" so I pointed this to the new IWD2EE.exe
This would launch but be incredibly slow.
The launcher would also say cnc was not installed.
In Heroic there's an option to run EXE with Wineprefix option when looking at a games properties. Ran the cnc-config.exe or whatever it was called. I also disabled cmst in Heroic and using Proton GE but not sure if any of thats required.
This would let me run the game great...except some items were bugged 😆 lots of blank items on the floor with no icons.
So in the end I just used the same run EXE with Wineprefix option in Heroic on the Icewind Dale 2 EE installer and it worked. I have no idea if copying the files over originally helped at all or if I would have saved a ton of time just installing it directly.
I also had to update where the save game path is for cloud saves to work.
I don't think I did anything else. Just left Targos and the game runs great.
As other people have said though the discord would help. If you get a definitive answer maybe post it here? Lots of people don't use discord or find it hard to find info like this amongst all the noise. If your getting a black screen though and no launcher window for the resolution are you defintely targetting the IWD2EE.exe and not the original?